When measuring larger amounts (7 1/2 cc of each resin) we use graduated mixing cups. To measure small amounts (3 cc of each resin or a 6 cc mix) we use Flex Coat syringes because they do not contain silicone. ![]() Measuring Equal Proportions (Two Techniques) If the resins are too warm (over 100 degrees F) the catalytic reaction occurs too quickly. In cold weather we heat the A and B bottles with a lamp, space heater, hair dryer, warm tap water or other heat source until the bottles are no longer cool to touch but not warm (neutral to touch). This temperature makes it easier to measure equal portions and mix the finish thoroughly. Prior to measuring equal portions we like our finish to be around 80 degrees Fahrenheit. Note: We do not use color preserver on any of the wraps that hold the guides down because it prevents the finish from soaking into the thread, which is essential for a strong bond. Not thinning the primer coat allows recoating in 6 to 8 hours. When we are rushed to finish a rod and cannot wait 24 hours for the primer coat to dry we do not thin the first coat. Understand that when applying a primer coat thinned with acetone we allow 24 hours for the finish to cure before applying the next coat. When thinning with acetone, apply just enough finish to saturate the thread. Thinning with acetone allows for increased speed of application and extended pot life. This technique is most advantageous when finishing a large number of rods. We call the first coat the primer coat, which in most cases is thinned with acetone. Some heavier offshore and surf rods may require a third coat. These techniques work with both Flex Coat Lite and High Build. The directions list the steps of how we do it on our personal rods. We decided to include the following directions in our catalog addressing only measuring and mixing of Flex Coat. Measuring and Mixing… “The Flex Coat Way”įor years we have communicated with custom rod builders and manufacturers about our techniques to measure and mix Flex Coat Rod Wrapping Finish successfully.
0 Comments
Leave a Reply. |